Selecting the playback media mode
1
Press SOURCE to select the playback media mode.
Disc
(Default):
Select to playback a disc.
USB: Select to playback a USB flash drive.
0
You can also select the playback media mode by pressing SOURCE on the main
unit.
Switching the display’s brightness
The display brightness can be adjusted between four levels. Switching the
display off reduces a source of noise that affects sound quality, enabling
higher sound quality playback.
1
Press DIMMER.
0
The brightness of the display switches each time the button is
pressed.
0
The display brightness is set to most brightly by default.
0
If buttons are operated when the display is off, information is temporarily displayed
at the brightest setting.
0
The display is only turned off during playback.
Contents
Connections Playback Settings Tips Appendix
24
Front panel Display Rear panel Remote Index
To Next Page
Loading...
