Using the timer play function
1
Turn on the power of the connected components.
(v p. 20)
2
Switch the amplifier’s function to input from the
connected unit.
3
Press the OPTION button on the remote control for 5
seconds or more to turn on the timer play function.
“Timer Play On” is displayed on the display.
0
Pressing the OPTION button on the remote control for 5 seconds or more
switches the timer play function between on and off.
0
“Timer Play On” and “Timer Play Off” are only shown on the display when
the timer play function switches between on and off.
4
Insert a disc in this unit or insert a USB flash drive into
the USB port.
5
Switch the media mode of this unit to the media to be
played using the timer.
6
Set the audio timer for the desired times.
0
Refer also to the owner’s manual of the audio timer.
7
Turn the timer “On”.
0
The power of the components connected to the timer turns off.
0
When the set time is reached, the power of the different
components automatically turns on and playback starts from the
first track.
0
The timer play does not support the random play or program play.
Contents Connections Playback Settings Tips Appendix
35
Front panel Display Rear panel Remote Index
To Next Page
Loading...
