No sound comes out
No sound is produced. Or sound is distorted.
0
Check the connections for all devices. (v p. 15)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check the amplifier’s functions and controls and adjust as necessary.
0
Digital audio output stops during playback of the DSD files.
0
When pure direct mode is set to “Pure Direct On Mode2”, digital audio output stops. Set pure direct mode to “Pure Direct Off” or “Pure Direct On
Mode1” to output digital audio. (v p. 25)
Sound is interrupted or noise occurs
During playback from the CD-R/CD-RW, sound is occasionally interrupted.
0
This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc.
During playback from the USB flash drive, sound is occasionally interrupted.
0
When the transfer speed of the USB flash drive is slow, sound may occasionally be interrupted.
Contents
Connections Playback Settings Tips Appendix
42
Front panel Display Rear panel Remote Index
To Next Page
Loading...
