Denon DCM-560 - Parts List Information and Component Coding

NOTE FOR PARTS LIST
some case supplying of part may be refused.
WARNING:
Parts marked with this symbol /\
e Resistors
EX: AN 14K 2& 182 G FR
Type Shape Power Resist- Allowable Others
and per- ance error
| formance | | |
; Carbon : H : Pulse-resistant type
: Composition : Low noise type
: Metal oxide film : Non-burning type
: Winding : : : Fuse-resistor
: Metal film
: Metal mixture
: Lead wire forming
* Resistance
1 8 2 => 1800 ohm = 1.8 kohm
l T_____ Indicates number of zeros after effective number.
2-digit effective number.
* Units: ohm
1 R 2 => = 1.20hm
[ T____ 1 -digit effective number.
2-digit effective number, decimal point indicated by R.
* Units: ohm
@ Part indicated with the mark" © “are not always in stock and possibly to take a long period of time for supplying, or in
@ When ordering of part, clearly indicate "1" and "I" (i) to avoid mis-supplying.
@ Ordering part without stating its part number can not be supplied.
@ Part indicated with the mark "x" is not illustrated in the exploded view.
@ Not including Carbon Film +5%, 1/4W Type in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
e Capacitors
Ex.: CE
*
Type
: Aluminum foil
O4w 1H 2R2 M BP
Shape Dielectric Capacity Allowable Others
and per- strength error
formance | ] |
: High stability type
electrolytic
; Aluminum solid 4 212%
: Non-polar type
electrolytic
: Tantalum electrolytic 145%
: Film
: Ceramic
: Ceramic
: Ol
: Mica
: Metallized 7 0%
: Metallized
: Rippie-resistant type
> 410% : For charge and discharge
1 20% : For assuring high
frequency
1 480% : UL pant
~20% : CSA part
+ +100% : UL-CSA type
: Lead wire forming
: £0.25pF
:+0.5pF
: Others
Capacity (electrolyte only)
2.2 2
=> 2200uF
l t_. Indicates number of zeros after effective number.
* Units: pF.
2 R 2
2-digit effective number.
=> 2.2uF
I CL 61-digit effective number.
2-digit effective number, decimal point indicated by R.
* Units: pF.
Capacity (except electrolyte)
2.22
=> 2200pF = 0.0022uF
More than 2)— Indicates number of zeros after effective number.
2-digit effective number.
* Units: pF.
221
=> 220pF
[ to or 1) indicates number of zeros after effective number.
* Units: pF.
2-digit effective number.
* When the dielectric strength is indicated in AC, “AC* is included after the dieelectrc
strength value.
a aT ee OCM-S6O/460 ma
25