EasyManua.ls Logo

Denon DHT-S216 - Page 39

Denon DHT-S216
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Version Display Mode (SOC(MTK))
1.1. Actions
SOC version information is displayed when the device is started in this mode.
1.2. Starting up
(1) While the power is On, hold down buttons "
SOURCE
", "
VOL-
" and "
VOL+
" for at least 4 seconds.
(2) SOC version is displayed by LED(White).
LED1 LED2 LED3 LED4 LED5
Version Region code Blinking x # Blinking x # Blinking x # Non
Region code : Blinking x #(1=E1C, 2=JP, 3=E2, 4=E3)
Example display
Version LED1 LED2 LED3 LED4 LED5
E2, Ver102 Blinking x 3 Blinking x 1 Blinking x 0 Blinking x 2 Non
E2, Version : 3102 : Blinking : LED1 x3 LED2 x1 LED3 x0 LED4 x2
JP, Version : 2021 : Blinking : LED1 x2 LED2 x0 LED3 x2 LED4 x1
E3, Version : 4024 : Blinking : LED1 x4 LED2 x0 LED3 x2 LED4 x4
2. Version Display Mode (HDMI)
1.1. Actions
HDMI version information is displayed when the device is started in this mode.
1.2. Starting up
1. While the power is On, hold down buttons "
VOL-
" and "
VOL+
" for at least 5 seconds.
(2) HDMI version is displayed by LED(Green).
LED1 LED2 LED3 LED4 LED5
Version Region code Blinking x # Blinking x # Blinking x # Non
Region code : Blinking x #(1=E1C, 2=JP, 3=E2, 4=E3)
Front side
LED1 LED5
Front side
LED1 LED5
3. Version Display Mode (BT)
1.1. Actions
Bluetooth version information is displayed when the device is started in this mode.
1.2. Starting up
1. While the power is On, hold down buttons "
VOL-
" and "
VOL+
" for 3 seconds.
(2) Bluetooth version is displayed by LED(Blue).
LED1 LED2 LED3 LED4 LED5
Version Region code Blinking x # Blinking x # Blinking x # Non
Region code : Blinking x #(1=E1C, 2=JP, 3=E2, 4=E3)
4. Initialization Mode
(1) While the power is On, hold down buttons "
POWER
", "
SOURCE
" and "
VOL+
" for at least 5 seconds.
(2) All LEDs light up three times after initialization.
LED1 LED2 LED3 LED4 LED5
Step 1 Red Red Red Red Off
Step 2 Red Red Red Red Off
Step 3 Red Red Red Red Off
(3) Wait six seconds before turning on the power again.
Front side
LED1 LED5
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
39

Other manuals for Denon DHT-S216

Related product manuals