What to do if the voltage at pin 1 of the J5 connector on my Denon Home Theater System is not within the specified range?
If the voltage at pin 1 of connector J5 is not within the specification (24V±10%), the suggested solution is to replace the AC adapter.
General| Audio decoders | Dolby Digital, DTS |
|---|---|
| RMS rated power | 175 W |
| Audio output channels | - channels |
| Audio Return Channel (ARC) | Yes |
| Woofer diameter | 139.7 mm |
| Tweeter diameter | 12.7 mm |
| Woofer diameter (imperial) | 5.5 \ |
| Tweeter diameter (imperial) | 0.5 \ |
| Subwoofer location | Separate |
| Subwoofer connectivity | Wireless |
| Receiver included | - |
| Product color | Black |
| Recommended usage | Home theatre |
| Quantity | 1 |
| Bluetooth profiles | A2DP |
| Soundbar dimensions (WxDxH) | 1004 x 78.3 x 79.4 mm |
| Subwoofer dimensions (WxDxH) | 171.5 x 346 x 313 mm |
| Connectivity technology | Wired & Wireless |
Weight and Dimensions| Soundbar weight | 2300 g |
|---|---|
| Subwoofer weight | 5900 g |
To Next Page
