Denon DHT-S716H - Page 33

Proceeding :GRILL ASSY→BAFFLE ASSY
(1) Remove the screws.
When assembling, tighten the center screws rst, then work outward. (to prevent air from leaking)
(1) Remove the connector. Press the lock while removing the FFC.
Proceeding :GRILL ASSY→BAFFLE ASSY→AMP PCB
(1) Remove the connector. Remove the screws.
2. BAFFLE ASSY
View from the Top
x23 x2
View from the Top
J4
CN1
Press the lock x2
Pull
3. AMP PCB
x6
J1 J2
Red
Proceeding :GRILL ASSY→BAFFLE ASSY→WiFi ANTENNA (2.4GHz)
(1) Remove the screws. Press the lock while removing the FFC.
See "EXPLODED VIEW" for instructions on removing the 5GHz Antenna PCB.
4. WiFi ANTENNA (2.4GHz, 5GHz)
View from the Top
x4
Hooked on in 4 places
Sensor
Glue x4
Push the wire under the PCB
Wire on the PCB
5GHz GRY
5GHz BLK
2.4GHz GRY
2.4GHz BLK
5GHz GRY
5GHz BLK
2.4GHz GRY
2.4GHz BLK
5GHz GRY
5GHz BLK
2.4GHz GRY
2.4GHz BLK
d
33
Caution in
servicing
Electrical Mechanical Repair Information Updating