Need help?Do you have a question about the Denon DP-67L and is the answer not in the manual?
Controls the power ON/OFF state and indicates power status with an indicator lamp.
Stops turntable operation by lifting the tonearm and turning off the motor.
Initiates turntable rotation for 33 or 45 RPM records when pressed.
Indicates the turntable speed lock status; flickers during speed transitions.
Raises and lowers the tonearm; the lamp illuminates when the lifter is down.
Compensates for the force pulling the stylus towards the center during playback.
Adjusts the Q damping, recommended to match the stylus force value.
Used to achieve zero balance for the tonearm, ensuring proper tracking.
Secures the tonearm by disengaging and engaging it with the arm base.
Adjusts the horizontal amplifier's off-set voltage to 0 ± 0.01V for precise tonearm control.
Adjusts the lifter amplifier's off-set voltage to 0 ± 0.1V for smooth tonearm lifting.
Sets the end detecting position to 1.55 ± 0.05V for accurate tonearm auto-return.
Calibrates turntable speed to 33 and 45 RPM by adjusting specific VR controls.
To Next Page
General
