To Next Page
T
timAug 1, 2026
turntable won't turn. belt is on but doesn't spin
turntable won't turn. belt is on but doesn't spin
Essential warnings to prevent fire, electric shock, and damage from improper handling or exposure.
Instructions on proper handling, placement, ventilation, and protection from water, heat, and liquids.
Guidelines on power sources, grounding, cord protection, lightning surge protection, overload prevention, and servicing.
Key safety tips for users, including handling plugs, professional servicing, and preventing access by children.
Step-by-step instructions for connecting the turntable's audio and ground wires to an amplifier.
Guidance for resolving common problems like no power, no sound, scratching noise, and humming.
Drive System and Motor| drive system | Belt drive |
|---|---|
| motor | DC servo motor |
| speed | 33-1/3 and 45 rpm |
Tone Arm and Cartridge| tone arm | Dynamic balanced type |
|---|---|
| effective arm length | 195 mm |
| cartridge | DSN-82 |
Stylus and Output| stylus pressure adjustment range | 3.5 g (fixed) |
|---|---|
| optimal stylus pressure | 3.5 g |
| output voltage | 2.5 mV |
Power and Consumption| power supply | AC 120 V, 60 Hz (U.S.A. & Canada) / AC 230 V, 50 Hz (Europe) |
|---|---|
| power consumption | 2 W |
| mass | 2.8 kg |
Dimensions| dimensions (mm) | 360 (W) x 97 (H) x 357 (D) |
|---|---|
| dimensions (in) | 14-3/16(W) x 3-13/16(H) x 14-1/16(D) |
| mass | 6.2 lbs |
