To Next PageTo Next Page
Need help?Do you have a question about the Denon DP-47F and is the answer not in the manual?
General| Drive System | Direct drive |
|---|---|
| Speeds | 33 1/3, 45 rpm |
| Effective Length | 220mm |
| Overhang | 16mm |
| Cartridge Weight Range | 4 - 10g |
| Output Voltage | 2.5 mV |
| Weight | 9.5kg |
| Motor | DC servo motor |
| Platter | 300mm aluminum die-cast |
| Wow and Flutter | 0.015% WRMS |
| Signal to Noise Ratio | 78dB |
| Tonearm Type | Dynamic servo tracer |
| Stylus Pressure Adjustment Range | 0 - 2.5 g |
| Tracking Force | 1.5 - 2.0 g |
Safety warning to prevent fire or shock hazards by avoiding exposure to rain or moisture.
Wiring for British models and earthing advice for Australian models.
Apparatus remains connected to AC voltage when power switch is off; unplug when leaving.
Overview of power switch, speed selection, repeat, start, and stop buttons.
Details on locate, arm lifter, and tracking force adjustment knobs.
Instructions for removing packing and installing the platter and mat.
Guidance on connecting output/ground wires to amplifier and AC power plug.
Step-by-step guide to balancing the tonearm and setting tracking force.
Steps to take before starting playback, including amplifier and turntable setup.
Procedures for automatic, manual, and locate function playback methods.
Covers transparent records, repeated play, and how to stop playback.
How to replace the stylus tip, including type recommendation and warnings.
Attaching a new cartridge, overhang details, and necessary readjustments.
Covers motor details, power supply, consumption, dimensions, and weight.
Details tonearm properties and cartridge output, frequency, and force.
Troubleshooting for unit not operating, no sound, hum, or weak/strong audio.
Covers stylus skipping, arm stopping, tuner noise, and normal tonearm movement.
