4
Select “Envaya” from the list of devices displayed on
the screen of your Bluetooth device.
When pairing is complete a notification sound is heard and the
Bluetooth button changes from blinking to on.
.
If you are asked to enter a pass key in the Bluetooth device screen, enter
“0000”.
5
Listening to music.
Music played back on the Bluetooth device will now play through
your Envaya speaker.
Adjust the volume to an appropriate level.
NOTE
0
Envaya remains in the pairing mode for approximately 5 minutes and then will exit
pairing mode. If your device could not connect, please try again from step 3.
0
Envaya cannot pair with Bluetooth devices that require a pass key other than
“0000”.
Contents Preparation Connections
Volume adjustment
Troubleshooting
Appendix
15
Index
To Next Page
Loading...
