Denon HEOS 7 HS2 - Stereo Pair Configuration; Swapping Speaker Channels; Removing Stereo Pairs

o
Swapping left and right channels in a stereo
pair
1
Tap the “Rooms” tab.
2
Tap the Pencil e icon to enter Edit mode.
3
Tap a Stereo Pair (a room which contains two matching
HEOS speakers) to edit the group.
4
Tap on the Swap L&R switch to swap the left and right
channels of the two speakers.
5
Tap the Back arrow B to return to the list of Rooms.
6
Tap the Check Mark i icon to exit Edit mode.
o
Removing a stereo pair
1
Tap the “Rooms” tab.
2
Tap the Pencil e icon to enter Edit mode.
3
Tap a Stereo Pair (a room which contains two matching
HEOS speakers) to edit the group.
4
Tap on the Stereo Pair switch to return the paired
speakers to two individual speakers.
5
Tap the Back arrow B to return to the list of Rooms.
6
Tap the Check Mark i icon to exit Edit mode.
Contents Setup Use Troubleshooting Status LED Appendix
33