Denon HEOS HomeCinema HS2 User Manual

Playing music from Bluetooth device
o
Pairing the HEOS device with your Bluetooth
devices
1
Activate the Bluetooth setting on your mobile device.
2
Press and hold the Bluetooth button (V) located on the
back of the HEOS HomeCinema for 3 seconds and
release the button when you see a pattern of two green
flashes on the status LED.
3
Select “HEOS HomeCinema” from the list of available
Bluetooth devices.
In a few seconds your mobile device will indicate that it is connected
to your HEOS HomeCinema.
4
Play music using any app on your device. The sound
will now play from the HEOS HomeCinema.
NOTE
0
Disconnect and reconnect Bluetooth connections from your Bluetooth device.
.
Audio signal
Contents
Setup Use Troubleshooting Status LED Appendix
34

Denon HEOS HomeCinema HS2 Specifications

General

Soundbar speaker RMS power	- W
Woofer diameter (imperial)	5.25 \
Number of full-range drivers	2
Full-range driver diameter (imperial)	5 \
Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Image formats supported	BMP, GIF, JPG, PNG
Number of amplifier channels	4 channels
Audio decoders	DTS, Dolby Digital, Dolby Digital Plus
Audio output channels	2.1 channels
HDCP version	2.2
Connectivity technology	Wired & Wireless
Digital audio coaxial in	1
Cables included	AC, Audio (3.5mm), HDMI, LAN (RJ-45), Optical
Handheld remote control	-
Docking connector type	Not supported
Product color	Black
Built-in display	No
Virtual assistant	Amazon Alexa
Audio formats supported	AAC, ALAC, DSD, FLAC, MP3, WAV, WMA
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Mobile operating systems supported	Android, iOS

Weight and Dimensions

Depth	94 mm
Width	1017 mm
Height	82 mm
Soundbar weight	3100 g
Subwoofer depth	332 mm
Subwoofer width	171.5 mm
Subwoofer height	313 mm
Subwoofer weight	6600 g