Denon PMA-900HNE - Playback

EN
FR
ES
2
Setup
1
2
3
Optional
If you are connecting PMA-900HNE to a wired network, connect an Ethernet
cable (not included) between the amplifi er and your router. Do not connect the
Ethernet cable if you are connecting the amplifi er to a wireless network.
NOTE
The antennas are required for both Bluetooth and Wi-Fi functions.
1
Connect the antennas
Place the antenna squarely over the antenna terminal in the
upper-left or upper-right corner of the rear panel.
1
Turn the antenna clockwise until it is fully connected.
Do not over tighten.
2
Rotate the antenna upwards for the best possible reception.
3
1.PMA-900HNEE3_QSG_ENG_00A_220407.indd 21.PMA-900HNEE3_QSG_ENG_00A_220407.indd 2 2022/04/07 10:42:462022/04/07 10:42:46
PrintingColor:Black