TV
TV Input
Set the input source to be used when playing audio from the TV through
this unit. Set this according to the jack on this unit being used to connect to
the TV.
None / Optical1 / Optical2 / Optical3 / Coaxial
(Default: Optical1)
Auto-Play
When a TV audio source is input to this unit, the unit automatically
switches to the input source set in “TV Input” and the “Auto-Play” function
for playing TV audio on this unit is set.
On
(Default) :
Enables the “Auto-Play” function.
Off: Disables the “Auto-Play” function.
0
The “Auto-Play” function does not work when “TV Input” is set to “None”. Set “TV
Input” in advance.
0
Depending on your TV, the “Auto-Play” function may not work.
Contents
Connections Playback Settings Tips Appendix
65
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
