Tips
I want to listen to high sound performance playback
0
The network and USB memory playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. Set “Network & USB-A” to
“Off” in the menu. (v p. 67)
0
The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Off” to the “Wi-Fi”. (v p. 67)
0
Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. Set “Off” to the “Bluetooth”.
(v p. 67)
I want to play TV audio at higher quality
0
Connect a line between the digital audio output connectors of the TV and the digital audio input connectors of this unit (COAXIAL or OPTICAL 1/2/3)
and switch the input source to the connectors where the line was connected (COAXIAL or OPTICAL 1/2/3). (v p. 25)
0
Only 2-channel linear PCM can be input as the digital audio signal to this unit.
I want to adjust the tone myself
0
Use the BASS, TREBLE and BALANCE knobs to adjust the sound as desired. (v p. 59)
I want sound playback that is faithful to the original sound
0
Set the source direct mode on. (v p. 59)
Contents
Connections Playback Settings Tips Appendix
72
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
