Why doesn't my Denon S-52 recognize my USB drive?
If “USB” is not displayed on the menu of your Denon Media Converter when a USB memory device is connected, check the connection. Ensure the USB device conforms to mass storage class. Note that DENON does not guarantee all USB memory devices will operate. If connected via a USB hub, connect the device directly to the USB port.
Why can't my Denon S-52 play CD-R or CD-RW discs?
If your Denon Media Converter won't play a CD-R or CD-RW disc, it might not be finalized. Finalize the disc and try again. Also, the recording conditions or the disc quality could be poor, so try using a properly recorded disc.
Why won't my iPod play on my Denon Media Converter?
If your iPod isn't playing on the Denon Media Converter, make sure the correct input source is selected. Also, ensure the iPod is properly mounted in the dock.
How to troubleshoot network connection issues on a Denon S-52 Media Converter?
If you cannot connect your Denon Media Converter to the network, verify that the SSID and network key (WEP) settings are correct. If the reception is poor, try moving the unit closer to the wireless LAN access point, removing obstacles, and keeping it away from microwave ovens and other networks' access points. If there are multiple networks, adjust the access point's channel settings or connect using a network cable.
Why can't my Denon S-52 connect to the server?
If your Denon Media Converter can't find the server or connect to it, check these items: * The computer’s or router’s firewall settings. * Ensure the computer is powered on. * Verify that the server is running. * Confirm the set’s IP address is correct.
What to do if Denon Media Converter won't play files from USB?
If your Denon Media Converter isn't playing files from a USB memory device: * Ensure the USB device is formatted as FAT16 or FAT32. * If the device has multiple partitions, only files in the top partition can be played. * Confirm the files are in a compatible format. * Note that copyright-protected files cannot be played.
Why can't I play internet radio on my Denon Media Converter?
If you're unable to play internet radio on your Denon Media Converter, check the following: * Verify that the Ethernet cable is properly connected and your network is active. * Confirm that the radio program is broadcast in a compatible format (MP3 or WMA). * Examine your computer's or router's firewall settings. * Ensure the radio station is currently broadcasting. * Check the set’s IP address.
How to fix a Denon S-52 Media Converter remote that is not working?
If your Denon Media Converter isn't responding to the remote control, try these steps: 1. Replace the batteries with new ones. 2. Ensure you are within the specified operating range. 3. Remove any obstacles between the remote and the main unit. 4. Verify the batteries are inserted correctly, matching the polarity marks. 5. Move the unit away from strong light sources like direct sunlight or fluorescent lights.
General| RMS rated power | 20 W |
|---|---|
| Connectivity technology | Wireless |
| Impedance | 4 Ω |
| Interface | USB |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN | Yes |
| Product color | Black |
| Audio formats supported | AAC, MP3, WAV, WMA |
| Power requirements | 100 - 240 V, 50/60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 37 W |
Weight and Dimensions| Depth | 226 mm |
|---|---|
| Width | 380 mm |
| Height | 126 mm |
| Weight | 6700 g |
To Next Page
