Need help?Do you have a question about the Denon Heos Drive and is the answer not in the manual?
General| Audio decoders | Dolby Digital, Dolby Digital Plus |
|---|---|
| Amplifier class | D |
| Audio output channels | 7.1 channels |
| Peak power per channel | 60 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| Pre out port | Yes |
| USB 2.0 ports quantity | 4 |
| Speakers connectivity type | - |
| Purpose | Home |
| Product color | Black |
| Cables included | AC, LAN (RJ-45) |
| Connectivity technology | Wired |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Operating temperature (T-T) | 5 - 35 °C |
Weight and Dimensions| Depth | 402 mm |
|---|---|
| Width | 430 mm |
| Height | 88 mm |
| Weight | 7200 g |
Requirements and initial setup steps before installing your HEOS device.
Instructions for connecting HEOS devices to your home network via Ethernet cable.
Steps to add additional wireless HEOS devices using the HEOS app.
How to select and control a specific HEOS Drive zone within the app.
Accessing and playing internet radio streams through the HEOS system.
Steps to play music files stored directly on your iOS or Android device.
How to access and play music files from a network-attached storage device or PC.
Connecting and playing audio from external devices via analog or digital inputs.
How to stream audio from an external device to multiple HEOS devices on the network.
Instructions for playing music files from a FAT32 formatted USB storage device.
Explanation of the purpose and benefits of a HEOS account for managing music services.
Details on how a HEOS account simplifies music service access and control across devices.
Guidance on creating a HEOS account when first accessing music services.
How to manage account settings, change password, or sign out of the HEOS account.
Steps to link supported online music services to your HEOS system.
How to edit settings for online music services, including sign-in and display preferences.
Procedure for grouping multiple HEOS rooms to play synchronized music.
How to remove a room from a group and stop synchronized playback.
Method to group all HEOS rooms simultaneously for synchronized playback.
Procedure to ungroup all HEOS rooms and exit Party Mode.
Queueing music to play immediately after the current track.
Clears the current queue and plays the selected item immediately.
Queueing music to play after the current song finishes.
Adding selected music to the end of the current playback queue.
How to reorder or remove songs from the current playback queue.
Procedure for removing individual songs from the Now Playing queue.
How to clear all songs from the Now Playing queue.
Procedure for saving the current queue as a HEOS Playlist.
Controls for managing repeat and shuffle modes during playback.
How to rename your HEOS Drive device within the HEOS app.
Settings for adjusting bass and treble levels for audio output.
Configuring the output level for analog line out connections (Fixed or Variable).
Selecting between Stereo or Dual Mono audio output modes.
Setting audio transcoding quality for multi-room streaming reliability.
Setting a maximum volume limit for HEOS Drive amplifiers.
Enabling or disabling preamp output for specific zones, especially in bridged mode.
Setting the frequency cutoff to limit low frequencies sent to speakers.
Adjusting the brightness of the front panel status light or disabling it.
Enabling subwoofer output and configuring settings for low-frequency audio.
Setting the frequency cutoff to limit high frequencies sent to a subwoofer.
Configuring manual/static IP addresses and Deep Standby mode.
Procedure for checking and installing firmware updates for the HEOS device.
Viewing technical details like hardware and software version of the HEOS device.
Configuring HEOS Drive integration with Denon AVRs via IP control.
Using the trigger output for controlling external amplifiers with a +12V trigger input.
Manual process to check for and install HEOS system software updates.
Option to send diagnostic information to Denon technical support.
Enabling music sharing from a mobile device to other HEOS controller apps.
Resetting the HEOS controller app to its original installation state.
Overview of power saving modes: Quick Start, Deep Standby, and Off.
Details on automatic entry and exit from Quick Start power saving mode.
Explanation of the Deep Standby mode triggered by network disconnection.
Procedure to completely turn off the device using the rear panel power switch.
Solutions for when the HEOS device is not detected on the network.
Troubleshooting steps for device overheating or protection circuit activation.
Solutions for intermittent audio playback issues related to network or interference.
Explanation and workaround for audio delay when using TV AUX input with HEOS.
Procedure to reset HEOS device settings, retaining current software.
Steps to restore HEOS device to original factory settings, including software.
Contact information for HEOS by Denon customer support in the U.S. and Canada, and other regions.
Description of Power LED states (OFF, ON, Power Management, Error).
Description of Network indicator states (OFF, Connect).
Description of Zone indicator states (OFF, Booting, Ready-Configured, Not Connected).
Status LED behavior during device update and rebooting.
Status LED behavior for soft reset, hard reset, rebooting, and not configured states.
Status LED behavior indicating Firmware, Hardware, or Network errors.
Status LED behavior indicating volume adjustments.
Status LED behavior indicating mute status.
Status LED behavior for Quick Start mode and Deep Standby.
List of audio formats supported via coaxial and optical digital inputs.
Technical specifications for the power amplifier, rated output, and connectors.
General specifications including operating temperature, power supply, and consumption.
Physical dimensions of the HEOS Drive unit in inches and millimeters.
Weight of the HEOS Drive unit, with and without brackets.
List of registered trademarks including Dolby, Google Play, and Apple.
Details on software licenses (GPL, LGPL) used in the HEOS Drive product.
To Next Page
