Denon Heos Drive - Advanced Settings; Network Settings; Firmware Upgrade; About

Advanced Settings
Caution
Adjusting these settings may disconnect your device from your network
and possibly render your device unusable. Do not use these features
unless you are comfortable making advanced adjustments.
o
Network Settings
1
Select “Advanced”.
2
Select “NETWORK SETTINGS”.
a. Manual or static IP address for your device
b. Deep Standby
3
Select Save Settings to apply the new settings or
Cancel Changes to revert to the previous settings.
o
Firmware Upgrade
1
Select “Advanced”.
2
Select “FIRMWARE UPGRADE”.
3
Manually check for a firmware upgrade.
o
About
Viewing technical details about the HEOS device.
1
Select “Advanced”.
2
Select “ABOUT”.
3
Scroll down to see information about the device’s
a. Hardware
b. Software
c. Device
Contents Setup Use Troubleshooting Status LED Appendix
41