The absorbance apps Blank button is used to establish a
reference absorbance within each measurement app. The graph
will not display a spectrum for a Blank measurement.
The absorbance apps Measure button is used for sample
measurements. It is inactive until at least one Blank
measurement is complete.
The fluorescence apps Standards Measure button is used to
measure standards when building a standard curve.
The Samples Measure button is used to quantitate samples.
The fluorescence apps Replicates On/Off button is used to
define if the standards curve enables one or up to three
replicates.
The fluorescence apps Basic Measure button is used to make
single measurements not being read from a standard curve.
Fields with Drop-Down Menus are indicated by black or white
triangles located on the bottom.
Fields with black underlines are editable by the user. Tapping on
the field will enable a keyboard, a numeric keypad or a dialog
box.
Application specific editor options can be accessed using the
List Add/Edit button found to the right of some drop-down
menus. Examples include the Dye, Sample Type and the
Colorimetrics Standard Curve lists. Tap the icon to access the
list or save new user defined entries.
Options buttons are used for such purposes as change units or
trend line analysis parameters in the fluorescence apps.
The Quick Print button is visible on the Run screen when a
DYMO printer is connected.
To Next Page
Loading...