8
4. General Screen Features
Run Screen
• Blank or Measure: Use these buttons to perform Blank and Sample
measurements.
• Sample Name and Sample Number: Tap the input box to enable a keyboard or
use a DeNovix approved barcode scanner to enter sample names.
• Sample Type and Factor Fields: Displays current sample type and associated
factors used for concentration calculations.
• Assay or Method Selections: Use the associated drop-down menus to select
an assay or method on the Run screen of an app.
• Absorbance App Graph: The spectral plot displays data for the current sample
normalized to a 10 mm pathlength for microvolume measurements.
• Florescence App Graph: The sample RFU is plotted on the standard curve trend
line for standard curve based fluorescence apps.
Report / Graph Screens
• Tap rows to highlight and select data for export. The Select All icon can be
used to quickly highlight all data rows.
• Erase highlighted sample records from both the Report and Graph screens
using the Delete icon. The cleared data will be available using the Data app.
• Tap a sample name and then tap the Edit icon to add or modify a sample
name. The change will be applied to the Report and Graph screen rows.
• Tap rows on the Graph screen to highlight and select data to display the
spectra. Up to 24 sample spectra may be overlaid on the graph.
• Color blocks are used as a legend convention.
• Highlighted sample data may be exported or printed using the Overflow Screen
Capture or Export functions. Screen captures may be emailed, saved to a USB
device, sent to a network folder and printed to either a network printer or
supported DYMO USB printers.
• Exported data are saved as .csv files. Absorbance app files include all
absorbance vs wavelength data for the full measurement wavelength range as
well as the calculated data displayed on the app Report screen. Fluorescence
app files include standard curve information as well as the calculated data
displayed on the app Report screen.
To Next Page
Loading...