DENSITY 1500 - Fog Refill System; Refill Connection and Fluid Reset

10. Fog Rell System
The rell ts into the uid compartment on the
side of the Density fog generator.
Start by connecting the fog rell with the hose
from the fog generator.
See how to insert
the fog rell in the
Density machine.
Connect the male and the
female connector.
Push the 2 parts together until
it ”Click’s”.
To disconnect, pull back the
outer ring, and the parts
disconnects.
10.1. RESET uid measure system
BOOT
USB
W2
W1
FIRETIME
RESET
IMPORTANT!
When inserting a new fog rell, or when exchanging a
Density fog rell, you need to RESET the uid measuring
system.
Simply push and hold the RESET button for 3-4 seconds.
See how
to reset the uid.
page 16/20
www.densityglobal.com | help@densityglobal.com
Version 1.1.4