To Next PageTo Next PageWhat to do if my Denso BHT-800 Barcode Reader is not charging?
If your Denso Barcode Reader (BHT) is not charging, ensure you're using the dedicated battery charger and that the battery cartridge is correctly inserted into both the BHT and the charger. The BHT LED should turn red when properly placed. Clean any dirt from the battery cartridge and BHT terminals. If the battery has been charged over 300 times, replace it.
Why does my Denso BHT-800 keep turning off?
If your Denso Barcode Reader (BHT) accidentally turns off, first ensure the battery cartridge is fully charged. If the issue persists, the auto power OFF setting may be enabled. Adjust this setting using the user program.
Avoid fire, high temperatures, direct sunlight, extreme temperature variations, impact, static electricity.
Charge via BHT or charger; observe LED indicators for status.
Power on BHT, set date/time using numeric keys and ENTER.
Turn on, press trigger, hold BHT near code until blue LED.
Address issues like reflection, distance, dirt, and lighting.
Turn off, slide lock, remove cover, replace cartridge within 3 mins, close cover.
Covers BHT not turning on, not charging, or turning off unexpectedly.
Covers BHT not turning on, not charging, or accidentally turning off.
General| Model | BHT-800 Series |
|---|---|
| Operating System | Proprietary |
| Storage Temperature | -20°C to 60°C |
| Scanning Technology/Method | Laser |
| Display | LCD |
| Connectivity | RS-232 |
| Power Supply | Battery |
