To Next PageTo Next PageWhy is my Denso Kheos unit not working?
Your Denso Accessories unit might not be working because: 1) The unit was switched on and off repeatedly. To resolve this, switch the unit off and wait at least 10 seconds before restarting it. 2) External unit fuses are blown. If this is the case, replace the fuses. 3) Internal unit fuses are blown. Replace the internal fuses to fix this.
What to do if the Denso Kheos vacuum pump is not working?
If your Denso Accessories vacuum pump isn't working, it could be due to a few reasons: 1) There's gas in the circuit. Try performing a recovery phase. 2) There's no power to the pump. Check the power supply and fuses. 3) The vacuum pump is damaged. In this case, you'll need to replace the pump.
What to do if leak test always indicates that there is a leak with Denso Kheos?
If the leak test consistently indicates a leak with your Denso Accessories, consider the following: 1) The pressure sensor might be out of calibration. Calibrate the pressure sensor (see Service menu). 2) There might be sediment in the vacuum solenoid. Remove the sediment to resolve this issue.
What to do if my Denso Accessories unit is not recovering?
If your Denso Accessories unit is not recovering, it could be due to: 1) A blown fuse. Check the fuse in the recovery compressor/solenoid valve on the circuit board. 2) A damaged recovery compressor. If damaged, replace the compressor.
What to do if my Denso Kheos unit does not charge refrigerant?
If your Denso Accessories unit isn't charging refrigerant, it might be because: 1) The charge solenoid isn't opening. Check the vacuum pump fuse. 2) The one-way valve is locked. Replace the valve to solve the issue.
Guides through the semi-automatic cycle using database or operator-controlled settings for A/C system restoration.
Explains the procedure for recovering refrigerant from the A/C system, including auto and partial recovery.
Details the process of creating vacuum in the A/C system to remove moisture and check for leaks.
Describes how to recharge the A/C system with the correct quantity of refrigerant.
Contains functions reserved for authorized technicians, including calibration and system checks.
Explains when and how to replace the refrigerant filters, including system warnings.
General| Brand | Denso |
|---|---|
| Model | Kheos |
| Category | Accessories |
| Language | English |
