Instruction Booklet
3ENGLISH
KHEOS
EN
Revision number 1 code 330080 Date 29/04/2014
DENSO THERMAL SYSTEMS S.p.A. would like to thank you for buying a product from its range and invites you to read this manual.
Inside this manual you will find all the information you need for correctly using the unit; please follow the instructions contained
in this manual carefully and read through every section. You should also store the manual carefully to keep it in good readable
condition. The content of this manual may be modified without prior notice, nor further obligations, in order to include changes and
improvements to the instructions already provided. No part of this manual may be reproduced or translated without prior written
consent of the owner. DENSO shall be responsible for any manufacturing defect that may arise during the entire warranty period
and undertakes to correct any defect as promptly as possible.
WARRANTY
The warranty is valid for 12 months from the date of purchase. The warranty covers only the replacement of faulty parts. The
warranty shall be invalidated if the equipment is found to have been improperly used or tampered with by people not authorized by
us or if nonconforming components or techniques have been used.
Declaration of Conformity______________________________________
Directive EEC 2006/42
Machine Directive
Directive EEC 2004/108
Low voltage directive
Directive EEC 2006/95
Electromagnetic compatibility directive
PED European Directive 97/23/EC
We: CTR S.R.L. Via T. ed E. Manzini n° 9, 43126 Parma (Italy) represented by its Legal Representative, declare on our sole
responsibility that the product:
Management System for air-conditioning and cooling systems
Model: Kheos
complies with the requirements of directive 2006/42, 2006/95/EC and 2004/108/EC and associated implementation provisions;
furthermore the pressure circuit complies with directive 97/23 as amended, and it is classified respectively:
• category I for the Kheos model.
We hereby specify that the maximum permissible limits for correct operation of the Kheos unit are:
• Maximum working pressure: 16 bar
• Maximum working temperature: +50°C
• Minimum working temperature: +5°C
We also point out that:
• the year of manufacture is indicated on the label (with CE marking) affixed onto the unit;
• the technical construction file is kept at our company by the legal representative.
To Next Page
Loading...