Need help?Do you have a question about the DENTIUM ICT MOTOR and is the answer not in the manual?
General| Brand | DENTIUM |
|---|---|
| Model | ICT MOTOR |
| Category | Dental equipment |
| Language | English |
Details the main unit, its controls, and connectors, including the irrigation pump.
Explains the foot controller's design and its function as a program shift control.
Details the micromotor, its handpiece adaptor, and connector.
Guides on connecting the power cable to the main unit safely.
Instructions for installing the irrigation stanchion and inserting the irrigation tube.
Details on connecting the disposable irrigation tube to the handpiece.
Guides on connecting the micromotor and explains error messages related to connections.
Step-by-step instructions for connecting and disconnecting the foot controller.
Instructions on how to power on the iCTmotor using the power switch.
Explains the function of each button on the control panel.
Details the information displayed on the LCD screen and its indicators.
How to select and customize program settings (STEP) for different procedures.
Guides on changing and saving STEP, RPM, and Torque parameters.
Instructions for modifying the handpiece rotation direction and gear ratio.
How to adjust the irrigation flow rate in three steps.
Explains beep sounds related to torque and reverse direction, and parameter adjustment.
Procedure for sterilizing the micromotor using high-pressure steam.
Instructions for cleaning the main unit and foot controller with alcohol.
Guidelines for cleaning and storing the micromotor, warning against disassembly.
A checklist for daily inspection of the main body, micromotor, and foot controller.
Explains various symbols used on the device and in the manual.
Shows the location of labels on the main body (front/rear) and micromotor.
Details RF and harmonic emissions compliance and guidance for environments.
Explains immunity tests for electrical, surge, and power quality.
Details RF immunity tests and environmental guidance.
Guidance on maintaining safe distances from RF equipment.
To Next Page