Operating Instruction iCTmotor 2
Dear Customers
The iCTmotor from Dentium is a driving engine for dental handpiece, designed for dentists to perform dental surgery
and implantology. The main unit is designed to operate a specific dental micromotor that drives dental handpiece
fitted with appropriate tools to cut hard and soft tissues in the mouth and to screw dental implants. This device is
optimized for dental implant procedure, featuring user-programmable controller to change parameters of dental
handpiece for every surgical steps of dental implant.
For the safety of both patient and dental practitioner, please read and understand this Operating Instruction prior to
the initial usage of this product. For technical support or any issues associated with this product, please contact the
authorized service center for prompt technical service.
1
. Safety guidelines
2. Caution
3. Components
4. Technical specification
5. Components description
6. Product installation
7. Operation
3
3
4
5
6
7
7
8
8
9
9
11
11
11
12
Contents
5.1 Main body
5.2 Foot controller
5.3 Micromotor
6.1 Power connection
6.2 Configuration of irrigation components
6.3 Connection of irrigation tube of handpiece
6.4 Connection of components
7.1 Turn on the unit
7.2 Control panel functions
7.3 LCD display description
7.4 Program choice and modification
8. Sterilization
9. Cleaning and storage
10. Maintenance
11. Trouble shooting during operation
12. Labeling description
13. Electromagnetic compatibility
1
3
13
13
13
14
14
15
16
17
17
18
18
19
20
21
22
23
7
.5 Program change and save
8.1 Micromotor sterilization
9.1 Main body and foot controller
9.2 Micromoto
12.1 Symbol description
12.2 Label-displaying position
Change STEP
Change RPM
C
hange torque
Change direction
Change the gear ratio
Change the irrigation amount
Foot controller
To Next Page
Loading...