Denver BFH-252 - Page 4




1 
2 
3 

5 


6 


7 
8 

Download App
Scan the following QR code, download and install the App DENVER FIT 2.
Scan QR Code and Download
Pairing
Open the app and set up your profile.
Go to [Device], click [Add a new device]. Choose your device on the
scanning list.
You can see the model name “BFH-252” on the app after paring.
Activate & Charge Device
Make sure power is working normally before initial use. In case the device
battery is low, connect the device to the charger. The device will
automatically boot up (please connect the USB in normal DC port
- 2 -