Denver CR-918 - POWER AND TIME SETTING; AC Power Connection; Manual Time and Format Adjustment

CONNECTING AC POWER
• PlugtheACpowercordtoahouseholdoutletACsource.
Note: IfanACpowerfailureoccurs,theclockautomaticallyswitches
tothebatterypowersupply,theclockandtimermemorycontinue
running.WhentheACpowerresumes,theclockswitchesbacktoAC
again.
TIME MANUAL SETTING
Instandbymode,pressandholdtheSET-MEM/M+button(2).
“24Hr”willblink.PresstheTune(5)orTune(1)buttontoset
thehourformatbetween12hour(12Hr)formatand24Hour(24Hr)
format.
PresstheSET-MEM/M+button(2)andthehourswillblink.
PresstheTune(5)orTune(1)tosetthecurrenthour.
PresstheSET-MEM/M+(2)buttonagainthentheminutedigitswill
blink.PresstheTune(5)orTune(1)tosetthecurrentminutes.
Oncesettingdone,pressSET-MEM/M+(2)buttononceagainto
indicatethecurrenttimeisset.
ALARM SETTING
1. PresstheAL.1/AL.2button(6/7)oncetopreviewthealarmtime.
2. Thealarmtimeisdisplayedandwillblink,press&holdtheAL.1/
 AL.2button(6/7)for3secondsandthehourswillblink.
3. PresstheTune(5)orTune(1)tosetthealarmhour.
4. PresstheAL.1/AL.2button(6/7)again;theminutedigitswillblink.
 PresstheTune(5)orTune(1)tosetthealarmminutes.
5. PresstheAL.1/AL.2button(6/7)tosetthealarmsoundmode:
 BuzzerorRadio.
6. Thealarmsoundmodewillblink.PressTune(5)orTune(1)
 tosetthealarmsoundmode.
7. IfyouselectalarmsoundmodewithRadio,thevolumewillblinkon
 thedisplay.
8. PressTune(5)orTune(1)tosetthealarmradiomaximum
 volume.ThenpresstheAL.1/AL.2button(6/7)whensettingis
 done.
Note: whenthealarmrings,thevolumeofthealarmwillgradually
increase.
ENG-2