Denver DAB-34 - User Manual

SIZE:105 X148mm
DAB-34
DAB+/DAB band III and FM digital radio
DAB+/DAB Band III und digitales UKW-Radio
DAB+/DAB bånd III og FM digital radio
DAB+/DAB band III and FM-digitalradio
DAB +/DAB Band III en FM digitale radio
Radio cyfrowe DAB+/DAB pasmo III i FM
DAB+/DAB-kaista III ja digitaalinen FM-radio
Banda DAB+/DAB III y radio digital FM
Radio FM numérique avec bande III DAB+/DAB
Radio digitale banda DAB+/DAB III ed FM
Rádio digital FM e DAB+/DAB banda III
DAB+/DAB pojas III i FM digitalni radio
DAB Radio Signal
Please notice that DAB signal can be weaken MUCH depending on the type of
building you are living in. (fx. It can be hard to catch proper signal when being in
a concrete building.)
Signal can also be different in different areas of the country. Please check your
local transmitter to get the best signal in your area.
Vær opmærksom på at det kan påvirke DAB signalet MEGET hvilken type
bygning man bor i. Det kan f.eks. være svært at få et ordentligt signal hvis man
bor i beton byggeri.
Der er også forskel på hvor god dækningen er i forskellige områder. Tjek nyeste
dækningskort på www.dabradio.dk under ”hvad er digital radio”.

Summary

Switching Your Radio On For The First Time

AC Operation

Connect the AC/DC adaptor to the DC input socket and mains outlet, then press STANDBY.

DC (battery) operation

Install batteries and press STANDBY to turn the radio on.

Basic Operation

Getting Started & Auto Scan

Initial setup and automatic scanning of DAB channels.

DAB Manual Tune

Manually tune through DAB channels by rotating the SEARCH control.

FM Radio Operation

Select FM mode, perform auto or manual frequency scans.

Resetting the Radio

Factory Reset

Reset the radio to factory settings to re-scan available stations in a new location.

Technical Specifications

Denver DAB-34 Specifications

General

Brand	Denver
Model	DAB-34
Category	Radio
Language	English