ENG6
Maintenance
REPLACING THE STYLUS:
- Refer to the figures 1-8
push the arm lock to
release the tone arm.
take off cap of the
cartridge to expose
the needle out.
separate the cartridge
take off the audio lines
from the cartridge
completely.
to fit a new one, just proceed in the opposite order, insert the audio lines accordingly, and install
the cartridge to the socket lightly.
NOTE: Please exercise extreme care whilst performing this operation so as to avoid
the tone arm and audio lines from any damage.
Maintenance
REPLACING THE STYLUS:
- Refer to the figures 5-6
To Next Page
Loading...
