EasyManua.ls Logo

Denyo DCA-60ESI2 - 6. Lubrication, cooling water and fuel; 6-2 Cooling water; 6-3 Fuel

Denyo DCA-60ESI2
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-2 Cooling water
(1) Water for cooling
Use the mixture of the good quality soft water like city water and the Long Life
Coolant (LLC) of anti-freeze and anti-rust for the aluminum radiator.
Percentage of LLC must be 30% to 50%, Under the 30%, the anti-rust effect will
decrease, and over the 50%, the anti-freeze effect will decease.
The following percentages are recommended for each ambient temperature;
30%: -10°C
40%: -20°C
50%: -30°C
In case of replenishment, use LLC of the same brand and the same density.
Normally LLC should be replaced eveiy 2 year.
(2) Total quantity of cooling water
Total cooling water quantity 1 5 . 4 L (1. 0)
6-3 Fuel
(1) Fuel to be used
#2 Diesel Fuel
[Note]
If other kinds of fuel is used or fuel being used contains water or dust, it deteriorates
the engine performance or leads to a serious trouble.
- 49 -

Related product manuals