To Next PageTo Next Page
Need help?Do you have a question about the Denyo DCA-20ESK and is the answer not in the manual?
Provides initial guidance on safe operation, symbols, and manual usage.
Covers hazards related to exhaust gases and electric shocks.
Addresses risks from moving parts, flammable fuel, hot coolant, and hot components.
Provides precautions for stacking machines and handling hot parts to prevent burns.
Details safe battery handling and operator conduct during operation.
Covers noise, house wiring, and transportation safety aspects.
Details warning lamps for high water temperature, oil pressure, and insufficient charge.
Warnings and precautions against electric shock during load connection.
Details the procedures for grounding the machine and the connected load.
Important precautions for selecting grounding locations and connecting grounding wires.
Lists essential checks before starting the machine, including oil, water, and fuel.
Step-by-step guide for starting the engine, including preheat and warm-up.
Ensures circuit breakers are off, sets throttle, and starts engine with preheat if needed.
Warms up the engine, checks frequency, and sets voltage for power transmission.
Details the sequence for safely shutting down the machine, including circuit breakers and cooling.
Explains protection devices and emergency stops for oil pressure, water temp, charge, and fuel level.
Details battery hazards like flammable gases and acid, with essential safety measures.
Outlines cautions for charging batteries, including disconnecting cables and preventing reverse polarity.
General| Model | DCA-20ESK |
|---|---|
| Type | Portable Generator |
| Rated Output | 20 kVA |
| Maximum Output | 22 kVA |
| Frequency | 50 Hz |
| Fuel | Diesel |
| Voltage | 230V / 400V |
| Phase | 3 Phase |
