What to do if Deprag Power Tool power exceeds maximum value?
If the power exceeds the maximum permissible value when using the Deprag Power Tool, check the screwdriving procedure and adapt it as necessary. For further assistance, contact the DEPRAG service department.
What to do if Deprag Power Tool is overloaded?
If the tool is overloaded over a defined time period, check the screwdriving procedure and adapt if necessary. If you have further questions, contact the DEPRAG service department.
What to do if Deprag Power Tool screwdriving step time was exceeded?
If the pre-set monitoring time of the screwdriving step was exceeded when using the Deprag Power Tool, check the screwdriving procedure and adapt it if necessary.
What to do if Deprag Power Tool program is not valid?
If the program is not valid (does not exist or was created for a different screwdriver) when using the Deprag Power Tool, check the program, adapt it if necessary, or select a different program.
What to do for Deprag Power Tool error in writing the program?
If there is an error in writing the program for the Deprag Power Tool, transfer the program again.
What to do if Deprag Power Tool transferred invalid program?
If an invalid program was transferred to the power unit of the Deprag Power Tool, check the program and transfer it again.
What to do if Deprag Power Tool screw assembly ended after power off?
If the screw assembly ended because the power unit was switched off for the Deprag Power Tool, please contact the DEPRAG service department.
What to do if Deprag Power Tool drive cannot move freely?
If the drive of the ED screwdriver cannot move freely, restart the MINIMAT®–ED screwdriver.
What to do if Deprag Power Tool switch off error remains?
If the error remains after switching the MINIMAT®–ED screwdriver off and on again, please contact the DEPRAG service department.
Essential safety guidelines for operating electronic screwdrivers.
Details on the display, status LEDs, and function buttons of the screwdriver.
Covers screwdriver start, program selection, torque setting, and menu operations.
General| Brand | Deprag |
|---|---|
| Model | 330EG36-0018 |
| Category | Power Tool |
| Language | English |
To Next Page
