Derby cycle Focus - 10.3 Cleaning the display; 10.4 Cleaning the control panel; 11 Technical data

VIII User Manual Pedelec Xion 31
If the motor is removed, e.g. for cleaning purposes, it
must not be held or carried by the cables under any cir-
cumstances, as otherwise there is a risk that the cable will
break.
If the motor has been removed om the ame of the
Pedelec, the plug om the motor and the socket of the
cable leading to the battery pack must be checked for
possible contamination and, if necessary, cleaned care-
lly with a dry cloth before reconnecting.
10.3 Cleaning the display
The contacts of the base plate should be cleaned periodi-
cally using a contact spray in order to ensure their nctio-
nality.
The housing of the display may only be cleaned with a
damp (not wet) cloth.
10.4 Cleaning the control panel
The control panel can be cleaned with a damp cloth where
necessary.
11 Technical data
MOTOR
Brushless electric motor
Output 250 W rated output/
650 W maximum output
Maximum torque 12 Nm rated torque/40 Nm
maximum torque
Gross weight
of electric drive,
battery, control unit
11 Ah 15.5 Ah
7.8 kg 7.8 kg
Control Via torque sensor and speed
sensor in the motor
XION LIION BATTERY
Capacities 11 Ah 15.5 Ah
Voltage 36 V 36 V
Gross weight 2.85 kg 2.85 kg