Derby cycle IMPULSE 2.0 SPEED - | Version 2 | 05.2015 English

Original User Manual | Pedelec Impulse 2.0 speed 35
Contents
1 Safety 38
1.1 General 38
1.2 Statutory requirements 39
1.2.1 Requirements for the rider 39
1.3 Battery 39
1.4 Charger 40
1.5 Motor 41
1.6 Adjustments/maintenance/repair 41
1.7 Transportation of the S-Pedelec 42
1.7.1 The S-Pedelec and your car 42
1.7.2 The S-Pedelec on trains 42
1.7.3 The S-Pedelec on aeroplanes 42
2 Components of the Pedelec 43
3 First steps 44
3.1 Checking the tightening torques 44
3.2 Fitting the pedals 44
3.3 Adjusting the saddle height 44
3.3.1 Clamping bolt 44
3.3.2 Quick-release device 44
4 Quick start 45
5 Battery 46
5.1 Charging the battery 46
5.1.1 Removing the battery 46
5.1.2 Charging the battery 47
5.1.3 Installing the battery 48
5.2 Battery information system 48
5.2.1 Checking the charge state 48
5.2.2 Checking the capacity 49
5.3 Battery management 49
5.3.1 Sleep mode 49
5.4 Warranty and service life 50
5.5 Storage 50
5.6 Ordering a replacement key 50
5.7 Shipping 51
5.8 Disposal 51
6 Charger 51
7 Control unit and display 52
7.1 Control unit 52
7.1.1 Switching on/o 52
7.1.2 Pushing assistance 52
7.1.3 / buttons 52
7.2 Display 53
7.2.1 Assistance indicator 53
7.2.2 Battery charge state indicator 53
7.2.3 Remaining range indicator 54
7.3 Programming and settings 54
7.3.1 Drive data 54
7.3.2 Delete trip data 55
7.3.3 Delete overall data 55
7.3.4 Device settings 55
7.3.4.1 Display 55
7.3.4.2 Drive 56
7.3.4.3 Miscellaneous 56
7.3.5 Personalize 57
7.3.6 Target cost 57
8 The motor 58
8.1 Operation 58
8.2 Range 59
8.3 Riding your Pedelec eciently 59
8.4 Warranty and service life 59
9 Troubleshooting 60
10 Cleaning 61
10.1 Battery 61
10.2 Motor 61
10.3 Display 61
10.4 Control unit 61
10.5 Charger 61
11 Replacing components of the fast Pedelec 62
11.1 Components that can only be replaced
with the same or approved parts 62
11.2 Components that do not require a
certicate of approval 62
12 Technical data 63