Derby cycle IMPULSE 2.0 - Page 57

Original User Manual | Pedelec Impulse 2.0 57
You can select the sub-items using the
/ buttons.
Pressing the
button takes you to the respective sub-
item. By selecting the sub-item “Back” and the
button
to conrm, you are taken to the menu sub-item display
once more.
The information regarding the price, average con-
sumption and the el type is necessary to enable
calculation of the money and CO
2
saved in compar-
ison with the use of a car. This is displayed in the
main menu of the information area under “Overall
savings” ➠ Chapter 7.3 “Display”.
Fuel price: Under the sub-item “Fuel price”, you can speci-
 the price of the els petrol or diesel in euros and cents.
You can set this to a value in euros between 0 and 9 euros
and a value in cents between 0 and 99 cents by using the
/ buttons on the control panel to move in 1-euro and
1-cent steps respectively. Once you have conrmed both
values by pressing the
button, you are taken back to
the menu sub-item display.
Fuel consumption Ø: You can enter the average el con-
sumption which would arise om the use of a car. You can
set the consumption in half-litre steps to between 0 and
20 litres. Navigate using the
/ buttons. Pressing the
button conrms your selection and then takes you back
to the menu sub-item display.
Fuel type: Under the sub-item “Fuel type”, you can choose
between the options “Petrol” and “Diesel” by pressing
the
/ buttons. Pressing the button conrms your
selection and then takes you back to the menu sub-item
display.
Power cost: Under the sub-item “Power cost”, you can
speci the price of electricity in cents (ct). You can set
this to a value of between 0 and 99 cents by using the
/ buttons on the control panel to move in 1 cent steps.
Pressing the
button conrms your selection and then
takes you back to the menu sub-item display.