Need help?Do you have a question about the Dericam Sx Series and is the answer not in the manual?
General| Ingress Protection | IP66 |
|---|---|
| Video Compression | H.264 |
| Lens | 3.6mm |
| Night Vision | Yes |
| Power Supply | 12V DC |
| Operating Humidity | 10% ~ 80% non-condensing |
| Weather Resistance | Yes |
| Resolution | 1920x1080 (Full HD) |
Guidelines for safe electrical installation and operation to prevent hazards.
Precautions for device handling during transport, storage, and installation.
Rules for qualified repair professionals and environmental operating conditions.
Instructions for cleaning the camera lens and sensor.
Verifying package contents and inspecting the camera for physical damage.
General introduction to the camera's connectivity and functionality.
Details HD Resolution, P2P, H.264 encoding, web and mobile access.
Describes capabilities for recording, searching, and playback.
Provides detailed technical specs including sensor, resolution, network, and general properties.
How to connect the camera to a router via Ethernet or Wi-Fi.
Details physical installation process, including mounting instructions.
Provides default login credentials and password security recommendations.
Accessing the camera using the "Dericam" app on mobile devices.
Accessing the camera via web browser on Windows and Mac OS.
Guide to using the Windows Search Tool for finding and managing cameras.
Instructions for using the Mac Search Tool to locate cameras.
How to access the camera directly via IP address and HTTP port.
Accessing remotely using UPnP, DDNS, or port forwarding.
Connecting the camera to an NVR using ONVIF protocol.
Accessing camera streams via RTSP player like VLC.
Steps and methods for adding cameras to the mobile app.
Guide to setting up a brand new camera via the mobile app.
Guide to adding a previously set up camera to the mobile app.
Viewing, editing, or deleting cameras in the app's list.
Previewing video and accessing configurations from the live view screen.
Changing the camera's password via the mobile app.
Configuring motion detection and its sensitivity for alarms.
Setting up actions triggered by alarms, like notifications or saving files.
Configuring scheduled recording parameters like duration and stream.
Adjusting audio input/output, encoding, and volume.
Configuring video encoding, bitrate, frame rate, and quality.
Searching for and connecting the camera to a Wi-Fi network.
Checking SD card status and formatting it.
Setting the camera's date, time, and time zone.
Configuring email alerts for alarm events.
Setting up FTP for storing recordings or alarm-linked files.
Options for rebooting, restoring factory defaults, and checking firmware.
Viewing device ID, network connection, software version, and IP address.
Browsing and managing pictures and videos saved on the mobile device.
Browsing and playing back recorded videos from the SD card.
Interface for logging into the camera's web UI.
The live view interface for monitoring the camera feed and its controls.
On-Screen Display settings for showing information like date/time.
Controls for manually moving the camera's pan and tilt functions.
Options for selecting between main and sub video streams.
Setting and recalling predefined camera positions.
Adjusting image parameters like hue, brightness, contrast, and saturation.
Icons for various functions like zoom, audio, and playback control.
Interface for searching and playing back recorded videos, browser-dependent.
Steps to search and play back video recordings by date and time.
Playback controls for pausing, playing, and adjusting volume.
Configuring video and audio settings, including frequency, encoding, and streams.
Network settings including IP, DHCP/Static, ports, and wireless setup.
Configuring alarm functions like audio, motion detection, and alarm links.
Advanced settings including user, auto snap, timed recording, email/FTP, PTZ, multiple devices, and privacy mask.
System settings including time, maintenance, device info, and logs.
Guide to accessing live view via web browser, including plugin installation.
Instructions for installing the Dericam browser plugin for IE.
Instructions for downloading and installing the plugin for Firefox browser.
Procedure for removing the Dericam browser plugin from the computer.
How to reset the camera's username and password using the reset button.
Troubleshooting recording/snapshot problems in IE/Firefox on Windows 10.
Steps to troubleshoot Wi-Fi connectivity problems with the camera.
How to allow or activate NPAPI plugins blocked by Firefox for camera access.
Device compliance with Part 15 of FCC Rules and potential interference.
Guidelines for installation and operation regarding RF exposure limits.
To Next Page
