Need help?Do you have a question about the Dericam B2A and is the answer not in the manual?
Crucial advice on securing the camera by changing default passwords.
Steps to connect the camera to your network via Ethernet or Wi-Fi.
Information on the default username and password, and how to change them.
How to access the camera using the Dericam mobile app.
Accessing camera functions via a web browser on computers.
Connecting to the camera directly using its IP address in a web browser.
Accessing the camera remotely using UPnP, DDNS, or Port Forwarding.
Connecting the camera to an NVR using the ONVIF protocol.
Accessing live video and audio streams via RTSP using players like VLC.
Steps to add cameras to the Dericam mobile app.
Guide for adding a new camera via scanning or manual UID entry.
Detailed steps for adding a camera by scanning the local network.
Adding a camera manually using its UID code.
Procedure to change the camera's password using the app.
Setting up motion detection sensitivity and enabling alerts.
Configuring push notifications, email alerts, and snapshot saving.
Setting up automatic recording schedules for the camera.
Configuring email parameters for motion detection alerts.
Details of the login page and initial password change.
General section for configuring alarm types and responses.
Defining motion detection areas and adjusting sensitivity.
Linking alarms to actions like email snapshots or saving files.
Setting up email parameters for sending alarm notifications.
How to reset the camera's username and password.
To Next Page
General
