Why is the suction performance reduced on my Designair Ventilation Hood?
If your Designair Ventilation Hood's suction performance is reduced, try the following: * Increase the fan speed. * Adjust the distance between the hood and hob: 750mm for gas hobs, 650mm for electric hobs. * Check and clear any obstructions in the top vent (models VHB60SS & VH60W). * Ensure the optional vent kit is properly installed according to the instructions.
How to stop excessive vibration in my Designair Ventilation Hood?
If your Designair Ventilation Hood is vibrating excessively, it might not be properly mounted on the brackets. Take the appliance down and double-check the installation. Another potential cause is a damaged fan blade, in which case you should switch off the appliance and have it repaired by a qualified technician.
What to do if both light and motor do not work on my Designair Ventilation Hood?
If both the light and motor on your Designair Ventilation Hood aren't working, start by checking the light bulb and replace it with one that has the correct rating. Also, check the power supply to ensure the connection isn't loose.
Important preliminary steps and checks before using the appliance.
Crucial safety instructions and warnings for proper and safe operation.
Overview of the appliance's primary features and capabilities.
Instructions on how to use the appliance's controls and functions.
Guidance on cleaning, maintenance, and replacing parts.
Common issues, their causes, and recommended solutions.
Information on environmentally responsible disposal of the appliance.
Details on technical specifications, regulations, and legal compliance.
Statement of compliance with relevant European directives and standards.
Step-by-step guide for installing the cooker hood.
Specific information and energy efficiency data for EU regulations.
General| Material | Stainless Steel |
|---|---|
| Lighting | LED |
| Number of Speeds | 3 |
| Colour | Black |
| Venting Type | Ducted |
To Next Page
