Why is the suction performance reduced on my Designair Ventilation Hood?
If your Designair Ventilation Hood's suction performance is reduced, try the following: * Increase the fan speed. * Adjust the distance between the hood and hob: 750mm for gas hobs, 650mm for electric hobs. * Check and clear any obstructions in the top vent (models VHB60SS & VH60W). * Ensure the optional vent kit is properly installed according to the instructions.
How to stop excessive vibration in my Designair Ventilation Hood?
If your Designair Ventilation Hood is vibrating excessively, it might not be properly mounted on the brackets. Take the appliance down and double-check the installation. Another potential cause is a damaged fan blade, in which case you should switch off the appliance and have it repaired by a qualified technician.
General| Brand | Designair |
|---|---|
| Model | GCLED60SS |
| Category | Ventilation Hood |
| Language | English |
Initial checks, safety advice, and product information before proceeding with installation or use.
Lists the necessary tools required for installation and operation of the appliance.
Details optional accessories that are not included with the appliance but may be needed.
Crucial safety instructions for the installation, operation, and maintenance of the appliance.
Overview of the appliance's primary functions for air extraction and illumination.
Instructions on how to operate the appliance using the control panel.
Guides on cleaning, filter replacement, and general upkeep of the appliance.
Common issues and their solutions for appliance malfunctions and performance problems.
Information on environmentally responsible disposal and recycling of the appliance.
Details on electrical requirements, safety standards, and legal compliance.
Statement of compliance with relevant European directives and standards.
Details the two main installation types: ducted and recirculation options.
Provides dimensions, mounting hole locations, and minimum clearance for hob installation.
Instructions for drilling holes, inserting wall plugs, and fixing mounting brackets.
Steps for attaching the glass panel and connecting the LED lighting system.
Guidance on positioning the hood and replacing the aluminium filter.
Instructions for connecting ducting tubes, collars, and reducers.
Steps for completing the installation, including ducting covers and final checks.
Instructions for removing protective film and references for further information.
Table detailing technical specifications, energy consumption, and performance metrics.
Tips and recommendations for reducing the environmental impact during use.
Guidance on safe dismantling and disposal of the appliance at its end-of-life.
To Next Page
