DEVIreg™ Smart
Installation Guide18
display module, e.g. using a screw-
driver; it will be possible to set
the maximum floor temperature
up to 45°. Furthermore, it will be
possible to use only a room sensor.
However, this option is not recom-
mendable due to an increased risk
of overheating the floor.
IMPORTANT: When the ther-
mostat is used to control a floor
heating element in connection
with a wooden floor or similar
material, always use a floor sensor
and never set the maximum floor
temperature to more than 35°C.
To Next Page
Loading...
