EasyManua.ls Logo

DeVilbiss KK-5051 User Manual

DeVilbiss KK-5051
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SB-4-207-K (1/2018) 1 / 8 www.carlisleft.com
KK-5051 DISPOSABLE KB II CUP LINER
EN
SERVICE MANUAL
IMPORTANT! DO NOT DESTROY
It is the Customer's responsibility to have all operators and service personnel read and understand this manual.
Contact your local DeVilbiss representative for additional copies of this manual.
READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVILBISS PRODUCT.
Question and Answer IconNeed help?

Do you have a question about the DeVilbiss KK-5051 and is the answer not in the manual?

DeVilbiss KK-5051 Specifications

General IconGeneral
BrandDeVilbiss
ModelKK-5051
CategoryComputer Hardware
LanguageEnglish

Summary

Product Description and Kit Contents

KK-5051 Disposable Cup Liner Kit Contents

Lists items included in the KK-5051 Disposable Cup Liner Kit, such as liners, lids, and rings.

Solvent Compatibility Warning

Warns about halogenated hydrocarbon solvents reacting with aluminum cup components, causing an explosion hazard.

Static Electricity Hazard During Cleaning

Explains static electricity risks during cleaning and outlines grounding requirements to prevent fire or explosion.

Recommended Fluid Tube Replacements

Lists recommended stainless steel and aluminum fluid tubes for the KB II Cup.

Safety Precautions and Hazard Management

Key Safety Indicators and Information

Explains the meaning of WARNING, CAUTION, and NOTE indicators for user safety and equipment protection.

Hazard Identification and Safeguards

Details hazards like fire, explosion, toxic substances, and static electricity, along with their corresponding safeguards.

Installation Instructions

Preparing the Liner and Cup Assembly

Steps for inserting the liner, filling with coating, inserting the lid, and wrapping the liner over the lid.

Final Assembly of Cup and Fluid Tube

Instructions for placing the ring inside the lid and sliding the fluid tube through the opening to assemble the cup.

Disassembly and Cleaning Procedures

Liner Removal and Waste Disposal

Steps for disassembling the cup lid, removing the ring, pulling out the liner, and properly disposing of materials.

Critical Grounding for Cleaning Safety

Emphasizes the necessity of grounding the cup or waste container during cleaning to prevent explosions from static electricity.

Warranty and Support Information

DeVilbiss Limited Warranty Policy

Outlines the one-year materials and workmanship warranty for DeVilbiss products and warranty voiding conditions.

Global Customer Support Contacts

Provides contact information for international sales and customer support locations for DeVilbiss and Carlisle Fluid Technologies.