Operation, Maintenance, and Parts Manual for AFN5
ANGLE FINISHING NAILER
DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615
MGP-AFN5-1A 2/20/98
This manual contains information that is important for you to know and under-
stand. This information relates to protecting YOUR SAFETY and PREVENTING
EQUIPMENT PROBLEMS. PLEASE READ THIS MANUAL.
STEEL DRIVER SERIES
Specifications
MODEL.............................................................. AFN5
AIR INLET ......................................................... 1/4" NPT
WEIGHT ............................................................ 5 lbs.
LENGTH ............................................................ 13"
HEIGHT ............................................................. 10"
MAXIMUM PRESSURE ..................................... 125 PSI
PRESSURE RANGE .......................................... 75-100 PSI
FASTENER LENGTHS ....................................... 1" - 2 1/2"
MAGAZINE CAPACITY...................................... 100 Nails
SCFM REQUIRED @ 90 PSI ............................. Every 10 Fasteners
Delivered Per Minute
Requires .93 SCFM
MINIMUM COMPRESSOR HP
REQUIRED TO OPERATE ................................. 3/4 HP
(TANK MOUNTED)
To Next Page
Need help?
General
