Specifications
General specifications for all models:
- powerful 12, 15 or 18-inch subwoofers
- built-in amplifier module for amplification
- robust wooden construction, equipped with hard, textured coating
- metal handles for easy transport
- metal grille, acoustic foam on the inside
- passive cooling, no fans
- 35 mm pole mount for speaker pole and satellite speaker
- pole mount adapter max. load: 30 kg
- phase switch: 0 or 180 degrees
- HPF crossover switch - flat or HPF option for line outputs
- volume control
- ground lift switch
- IEC C14 power input with fuse holder
- equipped with on/off switch
- mains voltage: 220 - 240V, 50 Hz
- fuse: 20 mm glass, 250V, 5A
Technical specifications per model:
Model Artis B12A Artis B15A Artis B18A
Frequency range 20 Hz - 120 Hz
Voice coil diameter 3 in 4 in
Magnet 60 oz 100 oz
Woofer diameter 12 in 15 in 18 in
Maximum SPL (dB peak) 127 dB 129 dB 131 dB
Impedance 4 ohms 4 ohms 4 ohms
RMS power 300 W 500 W 500 W
nominal maximum power consumption 450 W 750 W 750 W
weight: 18 kg 24 kg 34 kg
dimensions: 440 x 425 x 370 mm 457 x 508 x 432 mm 500 x 950 x 600 mm
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's initials:15-07-2019 RV Revision date and author's initials: -