Specifications
- Versatile audio interface
- Ideal for recording and playing high quality audio
- Superb A/D and D/A conversion
- 2 in, 2 out 24-bit, 96 kHz interface
- Versatile inputs and outputs suitable for almost any source
- Support both mono and stereo input signals
- Supports line signals, microphone signals and Hi-Z instrument signals
- +48V Phantom power for condenser microphones
- Direct Monitoring function for latency-free direct monitoring of input signals (direct or mix)
- Combi jack/XLR input per input channel
- Balanced XLR stereo output
- Large master volume control with mute button
- USB bus-powered (Micro USB-B to USB-A included)
- Compatible with Windows and Mac OSX
- Compability with other operating systems (Linux, Android, iOS) not guaranteed
- Power LED-indicator
- Signal (green) and Peak (red) LED-indicator per channel
- +48V Phantom power LED indicator
- Kensington compatible cut-out for optional lock
- Headphone jack output via 6.35 mm TRS jack with individual volume control
Technical specifications:
Inputs:
- input type: combi XLR/jack connector per input channel
- support microphone signals (XLR), line signals (jack), Hi-Z instrument signals (jack + Hi-Z
switch)
- frequency range: 20 - 20.000 Hz
- impedance: 10 kOhm line input, 3.3 kOhm microphone input, 500 kOhm Hi-Z
- maximum input level: +20 dBu line input, +4 dBu microphone input, +12 dBu Hi-Z input
- phantom power: +48V switchable (both inputs simultaneously)
Outputs:
- 2x balanced XLR outputs (stereo possible)
- frequency range: 20 - 20.000 Hz
- maximum output level: +4 dBu
Audio processing:
- max. 24-bits, 96 kHz
- ADC dynamic range: 102 dBA at 48 kHz
- DAC dynamic range: 108 dBA at 48 kHz
Power supply:
- USB 2.0
The informaton shown in this user manual is subject to change without further notice.
Version:
1.0
Date of creation and author's initials:
24-10-2019 RV
Date of revision and author's initials: -
To Next Page
Loading...
