falling over, is not
stable
installed securely in the shock mount
on the tripod and that one of the
tripod legs is pointing towards the
audio source.
Loose screw on shock
mount hinge
If used often, the screw designed to
angle the shock mount may come
loose. Use a standard screwdriver to
tighten it.
Microphone sound is
too quiet
Microphone is too far away
from audio source
Position the microphone closer to
the audio source. If this doesn't
work, try increasing the recording
volume level.
Microphone sound too
loud or clipped
Microphone is too close to
audio source
When recording extremely loud
audio sources (such as a drum kit), it
is recommended to position the
microphone further away and/or
lower the recording volume level.
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's initials:
05-07-2017 RV
Revision date and author's initials: -
To Next Page
Loading...
