Devine MixDesk 1202FX-MP - User Manual

MixDesk PA mixers
802 / 1002 / 1202 (-FX-MP)
User manual
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's initials:04-12-2018 RV Revision date and author's initials: -

Summary

Safety instructions

Important health and safety information

Key health and safety advice, warnings, and precautions for using the device.

Operational guidelines

General rules and recommendations for operating the device safely and correctly.

Storage and transport

Guidelines and operation of this device

Mono channel overview

Explanation of mono channel functions, inputs, HPF, Gain, EQ, Aux, and FX controls.

Stereo channel overview

Pan, PFL, Peak, and Level controls

Stereo channel specific features

Stereo channel EQ and FX

Signal Outputs

Record and USB outputs

FX and Aux Sends

Mix Section Controls

Phantom Power

Provides +48V power for condenser microphones; activates on all mono channels.

Effects Processing

Effects module description

Back of Mixer Connections

Main Out connectors

How to connect products

Mixer troubleshooting guide

Mixer does not turn on

Troubleshooting steps for power-related issues.

No sound via inputs

Solutions for input signal problems, including gain and cable checks.

No sound from master output

Troubleshooting for issues with the master output signal.

Red Clip Limiter LED

Addressing frequent or continuous activation of the clip limiter.

Distorted, clipping, or crackling sound

Diagnosing and resolving audio distortion issues.

Insufficient volume through microphone

Troubleshooting low microphone volume, including phantom power checks.

Specifications

General specifications for all models

Mono channel strip specifications

Stereo channel strip specifications

Technical specifications per model

Devine MixDesk 1202FX-MP Specifications

General

Brand	Devine
Model	MixDesk 1202FX-MP
Category	Music Mixer
Language	English