Control Panel
Power Switch & Wind Speed
• Pressing the ON/OFF touch button to turn the fan on or off.
• Pressing the SPEED touch button will enable you to cycle between the 9 wind speeds.
Oscillation Buttons OSC
• Press the OSC touch button for the fan to swing both vertically and horizontally. If you press
the OSC touch button again the fan will no longer swing horizontally, and solely swing
vertically. If you press the OSC button again the fan will stop swinging vertically and solely
horizontally. Pressing the OSC touch button for a further time will turn off all OSC functions
and the fan will remain in a fixed position.
【Note】Do not adjust the OSC swing angle by hand!
Timer Function
• Press the TIMER touch button whilst the fan is in standby mode to set a time for the fan to
switch on within a 1-9-hour range. Note, you can only set the timer in one-hour intervals.
When the timer is set, the digital display will alternate between the current wind speed and the
duration until the fan switches on (providing the display light has not been switched off). If the
time frame that the timer has been set to switch on in is beyond one hour, the number
displayed next to the timer will reduce by an hour after each hour that passes, to provide a
more accurate indication of when the fan will switch on. Please note that if the fan is switched
on and off after the timer is set, this will erase the pre-scheduled timer.
• Press the TIMER touch button whilst the fan is on to set a time for the fan to switch off within
a 1-9-hour range. Note, you can only set the timer in one-hour intervals. When the timer is
set, the digital display will alternate between the current wind speed and the duration until the
fan switches off (providing the display light has not been switched off). If the time frame that
the timer has been set to switch off in is beyond one hour, the number displayed next to the
timer will reduce by an hour after each hour that passes, to provide a more accurate
indication of when the fan will enter standby mode. Please note that if the fan is switched off
and back on after the timer is set, this will erase the pre-scheduled timer.
To Next Page
Loading...
