CARE & MAINTENANCE
1. Make sure that the appliance is switched off and unplugged before cleaning or attempting to store
the fan.
2. Press the four clips situated between the grilles of the rear guard to remove the front guard.
3. Turn the cap bolt on the blade clockwise to detach it from the blade or rotate the blade
anticlockwise to remove the blades from the rear guard.
4. You can clean the front guard, blade and bundle with water.
5. Do not immerse the power cord into liquids. Wipe the exterior with a soft damp cloth or sponge.
Remove stubborn spots with a cloth moistened with mild liquid detergent. Do not use abrasive
scouring pads or powders. See the images below for reference.
6. You will need to reassemble the appliance after cleaning. Install the front guard and fan blades in
the reverse order of disassembly.
7. If you are storing the appliance ensure it is in suitable protective packaging, then store in a cool dry
place.
To Next Page
Loading...
